AlphaCard Technical Support

How to Enable HoloKote on a Rio Pro

How to Enable HoloKote on a Rio Pro

How to Enable HoloKote on a Rio Pro

Magicard’s unique HoloKote feature comes free with all Rio Pro printers, allowing you to add a watermark-like image to your ID cards at no additional cost. This makes your cards easier to authenticate and harder to tamper with or illegally duplicate. The Rio Pro also has the option to use a custom HoloKote.

The process of enabling HoloKote will vary slightly depending on your computer – this page will guide you though the process on both a PC and a Mac.

How To: HoloKote on a PC
  1. Go to your computer’s Devices and Printers folder.
  2. Right-click on the Magicard Rio Pro printer.
  3. Choose Printing Preferences from the pop up menu.
  4. Click on the Card Front menu. Check the box next to HoloKote, and then click Apply.Rio Pro HoloKote PC 1
How To: HoloKote on a Mac
  1. Open the card design you want to add HoloKote to, and click Print. Then select Advanced Options.Rio Pro HoloKote Mac 1
  2. Choose Printer Features.Rio Pro HoloKote Mac 2
  3. Choose Card Front 1 in the Feature Sets menu. Then choose Print with HoloKote Image.Rio Pro HoloKote Mac 3
  4. Select Save Current Settings as Preset, and then click Ok. This will save your settings, so this design will print with a HoloKote in the future.Rio Pro HoloKote Mac 4

You can also rotate your HoloKote image – for example to fit better on a vertical or horizontal card.

How To: Rotate the HoloKote Image
  1. Go to your computer’s Devices and Printers folder.
  2. Right-click on the Magicard Rio Pro printer.
  3. Choose Printing Preferences from the pop up menu.
  4. Click on the Card Front menu. Click on Security Options.Rio Pro Rotate 1
  5. On the Rotation drop down menu, choose the degree of rotation you need.Rio Pro Rotate 2
  6. Click OK to save this setting.

If you are using a HoloKote on both sides of a dual-sided card, follow these directions for the back side.

If you are using a Mac computer, you can rotate the HoloKote in the same menu where you enabled the HoloKote image.

Your Rio Pro printer’s HoloKote should now be enabled. You can then choose from the included HoloKote patterns in your printer’s drivers, or use a custom HoloKote.

If you need to, you can also disable your printer’s HoloKote.

How To: Disable HoloKote
  1. Go to your computer’s Devices and Printers folder.
  2. Right-click on the Magicard Rio Pro printer.
  3. Choose Printing Preferences from the pop up menu.
  4. Click on the Card Front menu. Uncheck the box next to HoloKote.
  5. Click Apply to save this setting.Rio Pro Disable HoloKote

If you continue to experience problems, please contact AlphaCard technical support.

WordPress Video Lightbox