CR8010 Mylar adhesive-backed PVC cards are perfect for typical direct-to-card printers. The Mylar backing offers greater thickness than paper backing for easier feeding. These Mylar adhesive-backed PVC cards are typically applied to prox or access control cards.
These cards are CR80 size, most commonly used plastic card size, measuring 3.375'' x 2.125'', the same dimensions as a credit card. CR80 10 mil Mylar adhesive back PVC cards are also known as:
- CR8010
- CR80.010
- 8010WTMYAD
These Mylar adhesive back CR80 PVC cards are 10 mil thick and are packaged in five shrink-wrapped packs of 100, for a total of 500 blank ID cads, and are vision inspected to ensure quality.
Remember: If you're placing these cards on pre-slotted access control cards, you will need a slot punch to render a hole in the Mylar adhesive-backed PVC card. Slot punching should be done AFTER printing to avoid damage to your printhead. See our Slot Punches section for options.
Note: 10 mil cards may not feed into every card printer. Please check your card printer specifications. If you are unsure if your printer is capable of printing on these thin cards, call us at (800) 717-8080.
| Additional Info |
*Card thickness is approximately 0.25 mil before removal of 0.15 mil adhesive back. May not feed/work in every dye-sub card printer. |
|---|---|
| Card Size | CR80 |
| Material | PVC |
| Color | White |
| Printer Compatibility | Badgy200, C50, DTC1000Me, DTC4250e, DTC1250e, DTC4500e, Primacy, SD160, Smart-30, Smart-50, Smart-70, SP25+, SR200, Zenius Classic, Zenius Expert, ZXP Series 1, ZXP Series 3, ZXP Series 7 |
| Quantity Per Pack | 1 Per Pack |
| Thickness | 10 Mil |