Datacard StickiCard 597640-001 CR80.10 Mil Adhesive Backed PVC Cards

Entrust Datacard 597640-001 Cards Details

The Entrust Datacard StickiCard 597640-001 CR8010 adhesive-backed PVC cards with polymeric backing are generally used by printing and then applying to proximity/technology cards. They are ideal for printing on most direct-to-card printers. Measuring 3.325'' x 2.125'', CR80 cards are the same length and width as a typical credit card but one third of the thickness. The polymeric backed version of adhesive cards are slightly thicker before printing, which can make them easier to feed for many ID card printers.

Remember, if you will be placing these cards on pre-slotted access control cards you will need a slot punch to make a hole in this adhesive-backed PVC card. Slot punching should be done AFTER printing to avoid damage to your printhead.

Note: This product is not compatible with Magicard printers. Magicard printers require the use of M3610-054B adhesive backed cards.

Note: Card thickness is 24 mil before removal of 14 mil adhesive back. 24 mil cards may not feed into every card printer. Please check your card printer specifications. If you are unsure if you printer is capable of printing on these thin cards, call us or chat live.